Pokemon 1st Gen Badge Rings 3D Printer Model

Author: @
License: CC BY
File formats: stl,3mf
Download type: zip
Size:7.6MB

The file 'Pokemon 1st Gen Badge Rings 3D Printer Model' is (stl,3mf) file type, size is 7.6MB.

Summary

https://youtu.be/ersInK-gh04

I was thinking about what to make for the contest and this hit me once i saw someone some Pokémon badges on someone's profile! So i made my own badges and then made a ring with them. The badge design are based on the anime. Picture from Pokémon Wiki
https://pokemon.fandom.com/wiki/Gym_Badges?file=Kanto_Gym_Badges_%2528Let%2527s_Go%2529.png

All the rings have the same height before reaching the background. This means you can print them all in one go and have them all be multi material with just a simple color swap.

Note: The closed rings (not “_open”) might require supports on the very top inside of the ring. My 3MF file for those has added support enforcers. Depending on your printer the open rings might need them too, mine did not. Let me know if you have any questions.

To insert the color swap follow the video or see instructions on PrusaPrinters page.

Size Chart:
All the hole diameters of the original models are 11mm. Below is the scaling that you would need for each ring size.

Ring Size- - - - - - - - - - - - - - -Nominal- - - - - - - - - - - - - - -Scale %
3- - - - - - - - - - - - - - -14- - - - - - - - - - - - - - -127.27
3.5- - - - - - - - - - - - - - -14.4- - - - - - - - - - - - - - -130.91
4- - - - - - - - - - - - - - -14.8- - - - - - - - - - - - - - -134.55
4.5- - - - - - - - - - - - - - -15.2- - - - - - - - - - - - - - -138.18
5- - - - - - - - - - - - - - -15.6- - - - - - - - - - - - - - -141.82
5.5- - - - - - - - - - - - - - -16- - - - - - - - - - - - - - -145.45
6- - - - - - - - - - - - - - -16.45- - - - - - - - - - - - - - -149.55
6.5- - - - - - - - - - - - - - -16.9- - - - - - - - - - - - - - -153.64
7- - - - - - - - - - - - - - -17.3- - - - - - - - - - - - - - -157.27
7.5- - - - - - - - - - - - - - -17.7- - - - - - - - - - - - - - -160.91
8- - - - - - - - - - - - - - -18.2- - - - - - - - - - - - - - -165.45
8.5- - - - - - - - - - - - - - -18.6- - - - - - - - - - - - - - -169.09
9- - - - - - - - - - - - - - -19- - - - - - - - - - - - - - -172.73
9.5- - - - - - - - - - - - - - -19.4- - - - - - - - - - - - - - -176.36
10- - - - - - - - - - - - - - -19.8- - - - - - - - - - - - - - -180.00
10.5- - - - - - - - - - - - - - -20.2- - - - - - - - - - - - - - -183.64
11- - - - - - - - - - - - - - -20.6- - - - - - - - - - - - - - -187.27
11.5- - - - - - - - - - - - - - -21- - - - - - - - - - - - - - -190.91
12- - - - - - - - - - - - - - -21.4- - - - - - - - - - - - - - -194.55
12.5- - - - - - - - - - - - - - -21.8- - - - - - - - - - - - - - -198.18
13- - - - - - - - - - - - - - -22.2- - - - - - - - - - - - - - -201.82
13.5- - - - - - - - - - - - - - -22.6- - - - - - - - - - - - - - -205.45

boulder-badge.stl 345.5KB
boulder-badge_open.stl 239.6KB
cascade-badge.stl 317.6KB
cascade-badge_open.stl 384.8KB
earth-badge.stl 892.5KB
earth-badge_open.stl 895.6KB
marsh-badge.stl 964.3KB
marsh-badge_open.stl 2.8MB
rainbow-badge.stl 374.2KB
rainbow-badge_open.stl 287.1KB
ringbadges.3mf 1.2MB
ringbadges_open.3mf 1.9MB
soul-badge.stl 962.0KB
soul-badge_open.stl 922.8KB
thunder-badge.stl 275.3KB
thunder-badge_open.stl 245.6KB
volcano-badge.stl 567.0KB
volcano-badge_open.stl 1.3MB