Pokeball 3D Printer Model
The file 'Pokeball 3D Printer Model' is (stl) file type, size is 1.7 MB.
The file 'Pokeball 3D Printer Model' is (stl) file type, size is 1.7 MB.
This pokeball is a subscriber recommendation, from our YouTube channel.
The pokeball is made up out of four parts: Top shell, bottom shell, belt and a front knob.
The pokeball is printable without support, but it is a good idea to use a small raft.
We used a bit of costom support on the shells "holes".
Assembling:
Press the shells onto the belt, and glue the knop onto it.
(You can glue the shells on as well)
Slicer settings:
Support - none (we used some costom, but it isn't needed)
Bed adhesion - raft (only 3 mm extra margin is needed)
Speed - 50 mm/s
Walls - 9 (makes the parts solid and concentric)
Layer height - 0.2 mm
Nozzle - 0.4 mm
| Pokeball_-_belt.stl |
| Pokeball_-_bottom.stl |
| Pokeball_-_knob.stl |
| Pokeball_-_top.stl |
