Pokémon Quick Ball – Fully Functional With Button And Hinge 3D Printer Model
The file 'Pokémon Quick Ball – Fully Functional With Button And Hinge 3D Printer Model' is (stl) file type, size is 6.6 MB.
The file 'Pokémon Quick Ball – Fully Functional With Button And Hinge 3D Printer Model' is (stl) file type, size is 6.6 MB.
In my quest to complete every pokéball in the style of MrFozzie's design, I have the quick ball.
If you have not already, I would look at the instructions for the Pokéball model by MrFozzie, all of the same rules apply here. The only new thing that needs to be noted are the blue details. Firstly make sure not to forget which is which. the details will fit best in the grooves they were designed for. When printing the details, orient the side details so that they sit on a flat edge, and the top and bottom details so the curve faces upward.
Print settings:
printed at a 0.15mm layer height on Bambu lab Carbon X1
3 perimeters
10% infill
all parts fill benefit from supports, and the detail bits should have rafts.
| 3mm_Hinge_Pin.STL |
| bottom_detail.stl |
| bottom_left_detail.stl |
| bottom_lid.stl |
| bottom_right_detail.stl |
| Button.STL |
| Inner_Shell_Bottom_3mm.stl |
| Inner_Shell_Bottom_3mm_Supported.stl |
| Inner_Shell_Top_3mm.stl |
| Inner_Shell_Top_3mm_Supported.stl |
| Outer_Button_Smaller.STL |
| Stand_.STL |
| top_detail.stl |
| top_left_detail.stl |
| top_lid.stl |
| top_right_detail.stl |
