This is my remix of the Pocket Rack EDC Tool Organizer.
All credits go to Earthling_EDC. He had the great idea.
My remix contains several files with different versions.
I call it the Swiss Edition because tools from the Swiss Card fit into it.
These can be bought separately.
The Quadro screwdriver requires an 8x3mm magnet.
My remix is slightly thicker than the original.
Have fun with it.
A Solidworks file for the simple remix is included.
Print as you can see on the picture of the slicer. The cut-out for the knife facing upwards.
There are small indentations on the back - this is a ruler.
Every 10mm there is a 1mm bump. So you can measure roughly.
Be sure to check out the original from Earthling_EDC.
| Pocket_Plate_Swiss_Edition.SLDPRT | 588.8KB | |
| Pocket_Plate_Swiss_Edition.STL | 24.7MB | |
| Pocket_Plate_Swiss_Edition_only_Tweezers_and_toothpick.STL | 23.6MB | |
| Pocket_Plate_Swiss_Edition_only_Tweezers_and_toothpick_flat.STL | 23.6MB | |
| Pocket_Plate_Swiss_Edition_without_Ruler.STL | 24.3MB | |
| Pocket_Plate_Swiss_Edition_without_Ruler_and_QUADRO_Screwdriver.STL | 23.8MB |
