Pocket 386 Port Adapter Boxes 3D Printer Model
The file 'Pocket 386 Port Adapter Boxes 3D Printer Model' is (stl) file type, size is 96.6KB.
The file 'Pocket 386 Port Adapter Boxes 3D Printer Model' is (stl) file type, size is 96.6KB.
These are some snap together boxes for the adapter accessories that come with the Pocket 386.
They snap together quite firmly, and you'll need to take care each cable is aligned through the slot so they do not get pinched when snapped together.
To assemble, ensure sure you have folded/packed the cable inside the box part to the desired protruding length, then seat/align the lid in the cable side of the box first. From there treat the lid like it is hinged a hinge and you will need to close down the other side of the box hard.
There is a groove on one side of the boxes so they can easily be reopened with a coin or large flat head screwdriver.
The parallel port will require you to slide and align the edges of the metal plate part of the port into the provided slots quite firmly (see final pic). The cable will also need to be folded at an angle slightly and pressed down a little more than the other two boxes.
Printed on an A1 Mini, 0.4mm nozzle, standard Bambu PLA, standard print quality.
| Parallel.stl | 141.6KB | |
| Serial.stl | 149.1KB | |
| VGA_PS2.stl | 151.9KB |
