Plug Connector Vmoto Super Soco TC Max Charger Battery 3D Printer Model
The file 'Plug Connector Vmoto Super Soco TC Max Charger Battery 3D Printer Model' is (STL) file type, size is 173.8KB.
The file 'Plug Connector Vmoto Super Soco TC Max Charger Battery 3D Printer Model' is (STL) file type, size is 173.8KB.
This is a plug for the Super Soco Vmoto TC Max and similar electric motorcycles. Helps if you want to connect a custom charger or if you want to use the battery to power a transverter. It fits into the connector on the side of the motorcycle and into the battery directly. Basic charging and discharging needs no more than the two thick pins.
I recommend to use the banana plugs shown in the screenshot as pins. You might need to compress the prongs a little to fit.
I added an alignment tool to hold the pins in place while glueing. Let them stick out 12mm from the bottom.
You can close the plug glueing the two parts together and/or using screws, for instance 2x7mm with countersunk head.
If your printer makes holes too small and outside dimensions too large compensate it with a negative "horizontal expansion" value in the slicer.
| TCMAX_Stecker_align.STL | 25.7KB | |
| TCMAX_Stecker_case.STL | 250.1KB | |
| TCMAX_Stecker_case_small.STL | 214.3KB | |
| TCMAX_Stecker_pins.STL | 57.2KB |
