This is the character Plop from the videogame Pow Vista!

There are 2 different version, normal feet and cut feet. Due to Plop's tail, he is backheavy and might fall over with the normal feet. The cut feet version has a slightly bigger surface area which allows him to stand on his own (although still not very stable, so be aware of that).

Plop needs some supports to print properly. Use tree supports for the best result. Make sure the tail is supported well, if the automatic supports don't provide enough support, you can manually paint extra supports for his tail. Alternatively, you can download the 3mf file which already has the correct supports (check the other settings for your printer!)

I printed Plop such that his feet have 100% infill in the hopes to weigh him down a little bit. I don't know if it helped, but it certainly didn't hurt. For the cut feet you can achieve this by adding a Height Range Modifier from 0-6mm, and setting the infill percentage for that modifier to 100%. Alternatively, you can once again just use the provided 3mf file.

I did not model Plop, this is a version of the in-game model modified for 3D printing. Don't worry, the creator of the videogame gave me permission to share this with you all :) If you're interested in checking out the game, check this link: https://powvista.com/