PlayStation GunCon 45 Trigger Mod 3D Printer Model
The file 'PlayStation GunCon 45 Trigger Mod 3D Printer Model' is (stl) file type, size is 12.7KB.
The file 'PlayStation GunCon 45 Trigger Mod 3D Printer Model' is (stl) file type, size is 12.7KB.
There are a few 3d-printable guncon trigger mods that add in a microswitch to the GunCon 45 to give the trigger a more "arcade" style feel.
I had already purchased my microswitches, and found that none of the existing prints suited my needs, as I was doing a 'drop-in' style switch, that left the gun unmodified, and just added the switch in the suitable location for activation.
While technically this may cause misfires, I haven't noticed any issues. You could easily solder the wires to the connections as needed if you wish, but I wanted to make sure this was suitable for both 'drop in' and 'modified' variants.
In any case, I printed this on a decent resolution and it only took 20 minutes. It is designed to have some double-sided tape under the print (for the recess and adhesion). I also used UV resin in the holes to hold it in place.
| GunCon45_Trigger_mod.stl | 159.3KB |
