Playseat Challenge Pedal Frame Improved Brackets 3D Printer Model
The file 'Playseat Challenge Pedal Frame Improved Brackets 3D Printer Model' is (stl) file type, size is 163.1KB.
The file 'Playseat Challenge Pedal Frame Improved Brackets 3D Printer Model' is (stl) file type, size is 163.1KB.
After some years using my Playseat Challenge chair / foldable cockpit, the plastic bolts that secure the pedals frame in place became worn out.
So I designed this clamp to replace them. It has a double inner diameter to properly grasp both poles sturdly. While the adjustment is still possible, it requires more effort as you will need a screwdriver for that.
It's working quite well so far, having been heavily used for 1 week or so.
Printed with PETG, 25% infill and organic supports as seen in the picture, just to ensure accurate dimensions.
Designed for M4x16mm bolts and nuts (not that one shown in the picture, it was M4x30 if I remember well).
Hope it proves useful in preventing the frame from suddenly coming loose mid-race :)
| Playseat_Challenge_Pedals_Bracket_byGus.stl | 526.0KB |
