Playseat Challenge Can Holder 3D Printer Model
The file 'Playseat Challenge Can Holder 3D Printer Model' is (stl) file type, size is 1.2MB.
The file 'Playseat Challenge Can Holder 3D Printer Model' is (stl) file type, size is 1.2MB.
This is a can holder for the Playseat Challenge or other brands of racing chair.
For anyone wondering why I made this and don't just simply put my drinks on the floor, well, I have a doggo, and he likes to touch things that are on the floor. This was my solution, and it works great!
It clamps onto the 25mm round bars, a 22mm version is also included for other brands of gaming chairs, though I haven't tested this and you may need a slightly longer screw..
The can holder will steadily hold a standard 330ml can all the way up to a 568ml pint can.
You will need:
4 x 16mm M4 Socket Cap Screws
1 x 25mm M4 Socket Cap Screw
5 x M4 Nuts
To assemble, attach the clamp to the chair first, with the nut for attaching the can holder in place. Then simply screw the can holder into place.
| CH_Clamp_22mm_1.stl | 424.2KB | |
| CH_Clamp_22mm_2.stl | 146.5KB | |
| CH_Clamp_25mm_1.stl | 426.5KB | |
| CH_Clamp_25mm_2.stl | 148.8KB | |
| CH_Clamp_35mm_1.stl | 656.1KB | |
| CH_Clamp_35mm_2.stl | 140.3KB | |
| CH_Holder.stl | 1.4MB |
