This is a motorized card shuffler. It uses 2 N20 Micro Gear Motor with a 30:1 gear ratio.
You can get this from aliexpress for a couple of dollars each:
https://www.aliexpress.com/item/33022320164.html
You will also need 20x M3 screws which are at least 10mm in length
I printed this and tested the design. It works a treat.
Video: https://youtu.be/lmVQb7ZjTrA
I have also included the step files so that it is easy to modify the design.
Happy printing.
| Base.stl | 568.6KB | |
| Base_.step | 293.2KB | |
| Front_Plate.step | 153.8KB | |
| Front_Plate.stl | 83.7KB | |
| Motor_Clamp.step | 31.7KB | |
| Motor_Clamp.stl | 26.1KB | |
| Stopper.step | 51.5KB | |
| Stopper.stl | 120.6KB |
