Playing Card Holder 3D Printer Model
The file 'Playing Card Holder 3D Printer Model' is (stl) file type, size is 49.5KB.
The file 'Playing Card Holder 3D Printer Model' is (stl) file type, size is 49.5KB.
I bought this case to store my Cards Against Humanity decks. If I leave my decks in the boxes they came in, I couldn't fit them all in the case. If I used the dividers with the cards loose, they fit weirdly. It had too much space and not enough dividers to hold them securely. I quickly modeled this in Fusion 360 to get the max storage I could in this case.
There are a few versions. The long versions are 251 mm long, which will require a large print bed or maybe printed diagonally. I made the short version 1/3 of the length so it could be printed on smaller printers. There are also versions to set the cards upright or on their side depending on what you need.
I realize the size is pretty specific to my needs. This could easily be modeled in Tinkercad or any other modeling tool. I'm hoping this inspires those just getting started to dive in and start solving problems.
| Sideways_Long_Card_Holder.stl | 101.1KB | |
| Sideways_Short_Card_Holder.stl | 33.3KB | |
| Upright_Long_Card_Holder.stl | 88.6KB | |
| Upright_Short_Card_Holder.stl | 29.4KB |
