This is a modular fort I designed to fit Lego figures.
The platform and turrets clip on to the walls and you can add as many walls as you like.
The walls are plain on the outside (except for the doors one) so that it makes it easier to print. Some parts need supports and brims and some don't.
| Ariel.stl | 153.2KB | |
| Doors.stl | 112.6KB | |
| Gate_Frame.stl | 330.2KB | |
| Gun.stl | 60.6KB | |
| Gun_Shaft.stl | 14.3KB | |
| Gun_Stand.stl | 191.9KB | |
| Gun_Stand_2.stl | 936.6KB | |
| lights.stl | 23.5KB | |
| Platform.stl | 70.6KB | |
| Pole.stl | 34.1KB | |
| Pole_Gun.stl | 99.7KB | |
| Radar.stl | 47.9KB | |
| Table.stl | 2.3MB | |
| TowerBottom.stl | 247.0KB | |
| TowerTop.stl | 244.0KB | |
| Tower_Platform.stl | 33.5KB | |
| Turret.stl | 18.6KB | |
| Wall_Controls.stl | 303.6KB | |
| Wall_Door_Frame.stl | 330.2KB | |
| Wall_Logo.stl | 267.3KB | |
| Wall_Slots.stl | 269.0KB | |
| Wall_Slots_2.stl | 218.6KB | |
| Wall_Turret.stl | 419.6KB |
