A plant stand with a small rim to keep the pot where it belongs. Suitable for a pot about 12-15cm across, but easily scaled. Plenty sturdy at 15% infill; the circular details in the base add some structural support.
You can either print this as a single piece with a fair amount of support material, or as two pieces that need to be glued together but print with minimal support. The base isn't radially symmetric because I'm lazy, so it only goes together one way.
July 2024: The segmenting on the round sections was bugging me, so I redid the model in OpenSCAD. The new version (V2) has a slightly different look (everything is round, so it's a bit less art deco), but should be functionally identical and everything is smoother. V2 does need supports.
| Plant_Stand_-_Base.stl | 277.0KB | |
| Plant_Stand_-_One_Piece.stl | 505.6KB | |
| Plant_Stand_-_One_Piece_-_V2.stl | 1.3MB | |
| Plant_Stand_-_Top.stl | 265.0KB |
