Plant Space Rocket 3D Printer Model
The file 'Plant Space Rocket 3D Printer Model' is (stl) file type, size is 10.9MB.
The file 'Plant Space Rocket 3D Printer Model' is (stl) file type, size is 10.9MB.
Bring plants or plant seeds into space!
This new Plant Space Rocket uses elements of "Voronoi LED toadstool tealight shade" by @funkshin (http://www.thingiverse.com/thing:1371598) and the "Flying saucer" from @gpvillamil (http://www.thingiverse.com/thing:10428/).
Good to know:
Print the ring with wall and floor thickness 5. Glue the ring on the bottom part of the rocket. So you can easily open and close the rocket.
Printed with PLA.
Update:
12.06.2016: Added "Plant-Space-Rocket-Unten_NEW_optimized.stl".
10.05.2016: Released two new versions. The "Mini Plant Space Rocket with Pot" https://www.thingiverse.com/thing:1548463 and the "Big Plant Space Rocket with Pot" https://www.thingiverse.com/thing:1548574.
22.04.2016: I made a small planting pot (Plant-Space-Rocket-4cm_Pot_NEW.stl), which can be used instead of the ring.
02.04.2016: I made a new Ring (Plant-Space-Rocket-Ring_NEW.stl). This should be easier to print.
.
28.03.2016: I made a new rocket bottom part (Plant-Space-Rocket-Unten_NEW.stl). The printing will be cleaner and the three standing feet are much stronger.
------------------------
If you have no 3D-printer, you can buy a printed copy here:
www.shapeways.com/product/NGKBY466W/
------------------------
| Plant-Space-Rocket-4cm_Pot_NEW.stl | 45.6KB | |
| Plant-Space-Rocket-Ring_NEW.stl | 45.6KB | |
| Plant-Space-Rocket-Top.stl | 20.9MB | |
| Plant-Space-Rocket-Unten.stl | 866.6KB | |
| Plant-Space-Rocket-Unten_NEW.stl | 899.5KB | |
| Plant-Space-Rocket-Unten_NEW_optimized.stl | 839.7KB |
