Plant Saucer – 4 Sizes 3D Printer Model
The file 'Plant Saucer – 4 Sizes 3D Printer Model' is (stl) file type, size is 8.2MB.
The file 'Plant Saucer – 4 Sizes 3D Printer Model' is (stl) file type, size is 8.2MB.
Simple Plant Saucers in 4 Sizes
Spring is finally here (and so is planting season in our garden), so we needed a few pots and particularly plant saucers for the smaller pots. I wanted them to be moderately water proof so they can also be used inside (which is why they are 1 mm thick all around - this gives you 4 layers at the bottom and walls of 2 lines).
So here is a set of simple, easy and fast to print plant saucers. Dimensions are for the inner diameter (i.e. the lower diameter of the pots you want to use it for):
But you can of course scale them to any size you need them.
FILAMENT Use something that's strong, heat resistant and easy to print. I am using Carbon Fiber PLA , which is stronger and slightly more heat resistant, looks good and is extremely easy to print. I found PETG to be a little trickier but PETG definitely helps with heat resistance when used outside.
PRINTING This should be a very easy print. Strictly no supports needed. All walls are 1 mm, so ideally print with a line width of 0.5 mm (which works great with a 0.4 mm nozzle) and a resolution of 0.25 mm.
HOPE YOU LIKE IT AND IF YOU LIKE IT PLEASE LIKE IT!
Enjoy!
| Saucer_110mm.stl | 4.9MB | |
| Saucer_140mm.stl | 4.8MB | |
| Saucer_70mm.stl | 4.9MB | |
| Saucer_90mm.stl | 4.9MB |
