Place Value Kit 3D Printer Model
The file 'Place Value Kit 3D Printer Model' is (stl) file type, size is 1.7MB.
The file 'Place Value Kit 3D Printer Model' is (stl) file type, size is 1.7MB.
This set is an extension of a set created by one of our parents. It provides opportunities for practice with place value, including three decimal places. The labels for each place are shortenings for space reasons: th = thousands, h = hundreds, t = tens, ones = ones, tth = tenths, hth = hundredths, thth = thousandths.These labels are stuck in, along with the number sign, decimal point and the posts.
The numbers for each place can be changed, and the counters can be added to the peg for each place.
Numbers have a cut out top right-hand corner to aid orientation.
Print 1 x base, 7 x peg, 7 x each number tile, 1 x each label tile, 1 x decimal point, 1 x number sign and 63 x counters for a full kit.
Can be used to support the teaching of AC9M2N01, AC9M2N02, AC9M4N01, AC9M5N01.
Print braille on a vertical face
| 0.stl | 204.0KB | |
| 1.stl | 66.7KB | |
| 2.stl | 143.8KB | |
| 3.stl | 147.2KB | |
| 4.stl | 196.2KB | |
| 5.stl | 140.3KB | |
| 6.stl | 208.9KB | |
| 7.stl | 259.8KB | |
| 8.stl | 215.3KB | |
| 9.stl | 147.0KB | |
| Bases.stl | 80.0KB | |
| Decimal_point.stl | 191.1KB | |
| Donut_counter.stl | 23.5KB | |
| hundreds.stl | 326.3KB | |
| hundredths.stl | 466.7KB | |
| Number_sign.stl | 254.6KB | |
| ones.stl | 488.9KB | |
| Peg.stl | 7.7KB | |
| tens.stl | 386.8KB | |
| tenth.stl | 527.2KB | |
| thousands.stl | 395.0KB | |
| thousandths.stl | 535.4KB |
