Cartridge case for the 'PiTrex' Vectrex to Raspberry Pi Zero interface cartridge. Choose the GPIO-Only files if your cartridge board doesn't have the DC socket fitted.
More details about the PiTrex project
This is based on the captive nut version of my regular 3D printable Vectrex cartridge case design, so uses a 22mm long 3mm or 1/8" bolt (may need to be cut down to size) and a nut to secure the two halves.
| PiTrex_cartcase_Bottom.des | 318.0KB | |
| PiTrex_cartcase_Bottom.stl | 87.4KB | |
| PiTrex_cartcase_GPIO-Only_Bottom.stl | 84.5KB | |
| PiTrex_cartcase_GPIO-Only_Top.stl | 39.3KB | |
| PiTrex_cartcase_Top.des | 288.0KB | |
| PiTrex_cartcase_Top.stl | 43.0KB |
