Piranha Plant Dice Tower 3D Printer Model
The file 'Piranha Plant Dice Tower 3D Printer Model' is (stl) file type, size is 1.0MB.
The file 'Piranha Plant Dice Tower 3D Printer Model' is (stl) file type, size is 1.0MB.
Update 1/26/24: I've added an alternative PipeWithStairs STL file that uses spiral steps instead of ramps for the dice. It's the same size as the Segment and Bottom files stacked on top of each other. If you print this, use at least 15% lightning infill.
This is a dice tower based on the piranha plant from the Super Mario franchise, designed in Fusion 360. There are four files, all of which snap together when printed, and all can be printed without supports. You can either glue parts together or leave it as is if you want to be able to disassemble it.
The "Segment" file is optional and can be printed multiple times if you want the pipe to be taller and have more ramps for the dice to hit on the way down (see pictures).
The hole diameter is 30mm, which should fit standard dice sets without issue. If your dice are very large, you might want to scale the files up before printing.
I printed with white filament and then painted with basic acrylic paints and a sealing coat of Mod Podge on top. You could certainly use colored filaments to save post-processing time, though.
| Bottom-STL.stl | 67.9KB | |
| Leaves-STL.stl | 260.6KB | |
| PipeWithStairs.stl | 88.0KB | |
| Segment-STL.stl | 63.5KB | |
| Top-STL.stl | 2.1MB |
