Pirakeet – Raspberry Pi Zero Handheld Retro Game Console 3D Printer Model
The file 'Pirakeet – Raspberry Pi Zero Handheld Retro Game Console 3D Printer Model' is (STL,SLDPRT,pdf) file type, size is 3.4MB.
The file 'Pirakeet – Raspberry Pi Zero Handheld Retro Game Console 3D Printer Model' is (STL,SLDPRT,pdf) file type, size is 3.4MB.
Here’s ANOTHER handheld Raspberry Pi game console!
Update: I remixed this design to use nicer buttons here http://www.thingiverse.com/thing:1595698
It was designed to use the Pi Zero and fit smaller printers (80x104mm) whilst still being simple to put together. The front and back are completely separate until you close the case, so you can work on one half at a time and keep everything neat.
This build pretty much follows the Adafruit PiGRRL Pocket one, but the image doesn’t work on the Pi Zero (for me anyway) so you’ll have to manually set up the screen and buttons after installing a Retropie image for the Pi Zero. This build does not have any audio.
Parts List:
o Pi male header
o Breadboard-friendly SPDT Slide Switch https://www.adafruit.com/products/805
o Tactile Button switch (6mm) x 20 pack https://www.adafruit.com/products/367
o Tactile Switch Buttons (6mm slim) x 20 pack https://www.adafruit.com/products/1489
o PowerBoost 1000 Charger - Rechargeable 5V Lipo USB Boost @ 1A - 1000C https://www.adafruit.com/products/2465
o Adafruit PiTFT 2.4" HAT Mini Kit - 320x240 TFT Touchscreen https://www.adafruit.com/products/2455
o JST 2-pin cable https://www.adafruit.com/products/261
o GPIO Ribbon Cable for Raspberry Pi Model A and B - 26 pin https://www.adafruit.com/products/862
o Adafruit Perma-Proto Half-sized Breadboard PCB – Single https://www.adafruit.com/products/1609
o Lithium Ion Polymer Battery - 3.7v 2500mAh https://www.adafruit.com/products/328 (Adafruit were out of stock so I got this one instead http://www.ebay.co.uk/itm/262064902439?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT) the dimensions of the battery I used are 58x49mm.
o M3x8mm countersunk machine screws x 13
o USB micro plug (cannibalise a charge lead from something)
There are pdf guides with photos included to help you build yours.
Also includes an stl for a blank rear half so you can add your name or whatever to it instead of the logo, and a basic clip on screen cover.
| Pirakeet_Back.STL | 459.7KB | |
| Pirakeet_Back_-_no_logo.STL | 213.2KB | |
| Pirakeet_Back_half.SLDPRT | 775.5KB | |
| Pirakeet_Board_Holder_A.STL | 37.8KB | |
| Pirakeet_Board_Holder_B.STL | 37.4KB | |
| Pirakeet_DPad.STL | 130.0KB | |
| Pirakeet_DPad_-_angled.STL | 194.0KB | |
| Pirakeet_Face_Button.STL | 95.4KB | |
| Pirakeet_Front.STL | 304.0KB | |
| Pirakeet_Front_half.SLDPRT | 1.4MB | |
| Pirakeet_Screen_Cover.STL | 104.6KB | |
| Pirakeet_Shoulder_Button.STL | 64.3KB | |
| Pirakeet_Start_Button.STL | 95.4KB | |
| Pirakeet_Start_Button_-_flush.STL | 17.7KB | |
| Pi_Zero_Console_Build_Guide.pdf | 1.8MB | |
| Pi_Zero_Console_Start_Guide.pdf | 259.5KB |
