Piper 2 Version 2 Enclosed CoreXY Design Based On 20mm OD EMT Conduit Pipes UK 3D Printer Model
The file 'Piper 2 Version 2 Enclosed CoreXY Design Based On 20mm OD EMT Conduit Pipes UK 3D Printer Model' is (stl,zip) file type, size is 4.0MB.
The file 'Piper 2 Version 2 Enclosed CoreXY Design Based On 20mm OD EMT Conduit Pipes UK 3D Printer Model' is (stl,zip) file type, size is 4.0MB.
Piper 2.2 printing: https://youtu.be/g6x3LBGErbc
[Update: renamed "frame-corner-joint.stl" to "enclosure-frame-corner-joint.stl"]
[Update: added gantry-motor-mount.nema23.stl and gantry-motor-mount.nema17.stl instead of gantry-motor-mount-.stl]
[Update: added "gantry-Z_Rod_Nut_Holder.12mmRod.500+.stl" for 500+ build]
[Update: combined regular and 500+ versions in one project, for parts which are different for 500+ version look for file names, which include "500+"]
This is version 2 of Piper 2 3d printer uses 20mm OD conduit pipes. The version which uses 17.8mm OD may be found here: https://www.thingiverse.com/thing:3294998.
Stepping into the area of enclosed printers with possibilities to print other materials like ABS and PolyCarbonate. Also utilizing new bearless Z bushings and new belt tension system.
Assembly instructions are published at https://piper3dprinters.com/?page_id=646
Since parts will work inside an enclosed environment with higher temperature I am using PETG as printing material.
Printing quantities:
6mm-belt-tensioner.stl - 2
frame-3xcorner.stl - 8
frame-3xcorner-bottom.stl - 8
frame-4xcorner.stl - 4
frame-4xcorner-bottom.stl -4
frame-corner-joint.stl - 8
frame-plate-holder.stl - 4
frame-Z-motor-holder-left.stl - 2
frame-Z-motor-holder-right.stl - 2
frame-Z-motor-mount.stl - 4
gantry-idlers-mount.stl - 2
gantry-idlers-rod-holder.stl - 2
gantry-motor-mount.stl - 2
gantry-motor-mount-.stl - 2
gantry-motor-rod-holder.stl - 2
gantry-X-carriage.stl - 2
gantry-Y-carriage.stl - 4
gantry-ZRod-nut-holder.stl - 4
gantry-Z-slider.stl - 4
joint bracket.stl - 48
bed mounting bracket 2.stl - 4
bed mounting bracket.stl - 4
gantry-X carriage-extruder mount fan blower.stl - 1
gantry-X carriage-Fan holder.stl - 1
gantry-X carriage-Heater holder.v1.2.stl - 1
gantry-X carriage-Wire Holder.stl - 1
gantry-Z Bracket.stl - 4
universal pipe bracket.stl - 1 (For Z mechanical sensor mount.stl)
Z mechanical sensor mount.stl - 1
Y Sensor pin.stl - 1
Join Piper builders on FB https://www.facebook.com/groups/258663638022956/
| 10mm-belt-tensioner-500+.stl | 110.2KB | |
| 6mm-belt-tensioner.stl | 113.0KB | |
| bed_mounting_bracket.stl | 194.6KB | |
| bed_mounting_bracket_2.stl | 125.1KB | |
| enclosure-frame-corner-joint.stl | 95.6KB | |
| enclosure.zip | 388.1KB | |
| frame-3xcorner-bottom.stl | 61.0KB | |
| frame-3xcorner.stl | 521.6KB | |
| frame-4xcorner-bottom.stl | 41.1KB | |
| frame-4xcorner.stl | 356.4KB | |
| frame-plate-holder.stl | 225.4KB | |
| frame-Z-motor-holder-left.stl | 206.7KB | |
| frame-Z-motor-holder-right.stl | 206.7KB | |
| frame-Z-motor-mount.stl | 128.6KB | |
| gantry-idlers-mount-500+.stl | 336.9KB | |
| gantry-idlers-mount.stl | 299.6KB | |
| gantry-idlers-rod-holder-500+.stl | 268.7KB | |
| gantry-idlers-rod-holder.stl | 271.3KB | |
| gantry-motor-mount.nema17.stl | 101.3KB | |
| gantry-motor-mount.nema23.stl | 97.9KB | |
| gantry-motor-mount.stl | 274.4KB | |
| gantry-motor-rod-holder.stl | 292.3KB | |
| gantry-motor_inside.12mmRod.500+.stl | 282.8KB | |
| gantry-motor_outside.12mmRod.500+.stl | 287.0KB | |
| gantry-X-carriage-500+.stl | 393.2KB | |
| gantry-X-carriage.stl | 338.6KB | |
| gantry-X_carriage-extruder_mount_fan_blower.stl | 2.4MB | |
| gantry-X_carriage-Fan_holder.stl | 84.0KB | |
| gantry-X_carriage-Heater_holder.v1.2.stl | 77.2KB | |
| gantry-X_carriage-Wire_Holder.stl | 767.5KB | |
| gantry-X_carriage-Wire_Holder.v1.2.stl | 716.7KB | |
| gantry-Y-carriage-500+.stl | 290.0KB | |
| gantry-Y-carriage.stl | 286.2KB | |
| gantry-Z-slider.stl | 531.1KB | |
| gantry-ZRod-nut-holder.stl | 238.7KB | |
| gantry-Z_Bracket.stl | 186.4KB | |
| gantry-Z_Rod_Nut_Holder.12mmRod.500+.stl | 324.6KB | |
| joint_bracket.stl | 131.8KB | |
| universal_pipe_bracket.stl | 96.2KB | |
| Y_Sensor_pin.stl | 62.4KB | |
| Z_mechanical_sensor_mount.stl | 78.6KB |
