Piper 1 3D Printer Version 3 Upgrade 3D Printer Model
The file 'Piper 1 3D Printer Version 3 Upgrade 3D Printer Model' is (stl) file type, size is 585.2KB.
The file 'Piper 1 3D Printer Version 3 Upgrade 3D Printer Model' is (stl) file type, size is 585.2KB.
This is an optional US Piper 1.3 upgrade parts for Piper 1.2 3d Printer https://www.thingiverse.com/thing:2966295
This set upgrades linear motion on X and Y to standard linear rods 8 or 12 mm.
This upgrade may be applied to Piper 1.1 and Piper 1.2. PTFE Z slider is experimental and not tested addition (Similar design was tested on Piper 2.2 https://www.thingiverse.com/thing:3294998 but not on Piper 1)
For sizes up to 300x300, you may use 8mm rods 500mm length with LMU8 bushings. For larger build use 12mm rods with LMU12 bushings.
Number of parts to print:
X Roller - 2
Y Roller -4
RodFixture - 10
Z Slider file is for the left side you will need to mirror it for the right side.
Project website: https://piper3dprinters.com
Join our FB group at https://www.facebook.com/groups/258663638022956/
| RodFixture_12mm_Rod.stl | 155.2KB | |
| RodFixture_8mm_Rod.stl | 150.5KB | |
| X-Roller_8mm_Rod.stl | 505.1KB | |
| X_Roller_12mm_Rod.stl | 517.5KB | |
| Y-Roller_12mm_Rod.stl | 286.1KB | |
| Y-Roller_8mm_Rod.stl | 285.9KB | |
| Z_Slider_Experimental.stl | 466.5KB |
