I created a range of realistic pipe fittings that may be added to your diorama. I used these as set-dressing when I created a diorama for my Old Factory Building Interior Set.
See also: https://www.thingiverse.com/thing:6011842
Check out my video clips:
https://youtu.be/XlwxsrwHdVk
https://youtube.com/shorts/8jczCFJsOB4
The items are modelled at 100% scale. You will need to scale the items in your slicer software. Ideally print using a resin printer.
To assemble the items, I pushed the mating items together with a twisting motion. To clean up the holes in fittings, I used a 5mm reamer. You could also use a small file or sandpaper to reduce the outside diameter of the pipe. Paint the assembly (or individual pieces) in your desired colour scheme.
| Pipe_Clamp_v01.stl | 92.9KB | |
| Pipe_Fitting_Cross_01.stl | 5.4MB | |
| Pipe_Fitting_Elbow_v01.stl | 3.3MB | |
| Pipe_Fitting_Flange_01.stl | 3.3MB | |
| Pipe_Fitting_Joiner_v01.stl | 2.4MB | |
| Pipe_Fitting_Plug_v01.stl | 1.6MB | |
| Pipe_Fitting_Tee_v01.stl | 3.9MB | |
| Pipe_Length_01_1000mm.stl | 35.2KB | |
| Pipe_Length_01_100mm.stl | 35.2KB | |
| Pipe_Length_01_200mm.stl | 35.2KB | |
| Pipe_Length_01_300mm.stl | 35.2KB | |
| Pipe_Length_01_400mm.stl | 35.2KB | |
| Pipe_Length_01_500mm.stl | 35.2KB |
