This is a clamp-on guide for cutting 2-inch PVC pipe (should work for ABS as well). It will help you to make a straight cut with a hand-saw without having to use a miter box.
To use, slide onto the pipe and then clamp on the thinner part of the ring. Clamping is not strictly necessary. Then slide the saw right against the edge of the ring.
If you need to cut a different pipe size, see the Instructions tab.
Prints in 1hr at 0.3mm layerheight with no support. Designed in Autodesk Fusion 360.
| 2in_pipe_cut_guide.f3d | 304.4KB | |
| 2in_pipe_cut_guide.obj | 303.6KB | |
| 2in_pipe_cut_guide.stl | 244.3KB |
