“Ping-Pong” Quadcopter Canopy 3D Printer Model
The file '“Ping-Pong” Quadcopter Canopy 3D Printer Model' is (stl) file type, size is 8.8MB.
The file '“Ping-Pong” Quadcopter Canopy 3D Printer Model' is (stl) file type, size is 8.8MB.
The Ping-Pong canopy is a lightweight and versatile option for 3 to 5 inch toothpick frames, housing 14mm FPV camera, nano RX module, FPV antenna, and (optionally) mini T antenna.
There's an LOS variant, which can mount 2 FETtec Tiny LED strips inside.
There's also a whoop variant for 65mm frames, such as the BetaFPV Meteor65, but it's slightly heavier than the usual injection molded canopies available.
The collection also includes a standalone RX / nano VTX mount which usually goes on top of the AIO.
Camera angles are relative to the bottom plate.
| 25.5mm_25deg_no_RX_TPU.stl | 2.1MB | |
| 25.5mm_25deg_RX_Minimortal_TPU.stl | 2.2MB | |
| 25.5mm_25deg_RX_TPU.stl | 2.2MB | |
| 33mm_25deg_Minimortal_TPU.stl | 2.3MB | |
| 33mm_25deg_TPU.stl | 2.1MB | |
| 33mm_35deg_TPU.stl | 2.1MB | |
| 33mm_LOS_17mm_TPU.stl | 1.6MB | |
| 33mm_LOS_20mm_TPU.stl | 1.6MB | |
| RX+VTX_mount_AIO_TPU.stl | 81.3KB | |
| RX+VTX_mount_TPU.stl | 58.1KB | |
| Whoop6_25deg_no_RX_TPU.stl | 2.2MB | |
| Whoop6_25deg_RX_Minimortal_TPU.stl | 2.3MB | |
| Whoop6_25deg_RX_TPU.stl | 2.2MB |
