Saw a post online about using a pineapple as a pumpkin substitute for jack-o-lanterns. I happened to have some orange to yellow color changing filament. So a I took an already created pineapple model and made it into a jack-o-lantern.
10/16/2018 - Added a hollowed pineapple body which saves about 50g of fillament. The inside of the pineapple can be printed without supports but the mouth still needs support. Used the PE slicer 1.41.1 RC to try support blockers and enforcers.
10/19/2018 - Pineapple-o-lantern_body_hollow_blank: Added a better hollowed pineapple than just a straight column. Bottom opening is a 26mm diameter. Blank so you can create your own version. Edit the filament to be zhuopu new materials(ZNM) from CC3D as ZNM is what it sells as on amazon.
10/21/2018 - Added 2 jack-o-lantern face using the new blank body. Printing at around 150% is enough for me to use led tealights.
| Pineapple-o-lantern_body.stl |
| Pineapple-o-lantern_body_01.stl |
| Pineapple-o-lantern_body_hollow.stl |
| Pineapple-o-lantern_body_hollow_blank.stl |
| Pineapple-o-lantern_top.stl |
| Pineapple-o-latern_full.stl |
| Pineapple-o_lantern_body_02.stl |
