Find this on GitHub at https://github.com/fabriziofiorucci/PiNAS
PiNAS is a 3D printed compact NAS enclosure based on Raspberry Pi and up to two SATA HDD/SSD units connected to the Raspberry Pi via SATA to USB converter.
Software-wise it runs on Raspbian and Samba/FTP/anything you like. Power supply can be provided using a 12V 5A external PSU that will power the +12V lines of HDD/SSD drives.
+5V power supply can be provided using a small buck converter such as the DC DC Step Down MP1584 that can provide up to 3A of current, enough to power the Raspberry Pi and the two disk units.
All parts should be printed using:
Use:
| Bottom_panel.stl | 350.7KB | |
| Bottom_rear_panel.stl | 83.4KB | |
| Fan_bracket.stl | 79.6KB | |
| Front_bracket.stl | 160.4KB | |
| Front_leg.stl | 75.1KB | |
| Left_panel.stl | 808.5KB | |
| Left_panel_rear.stl | 192.5KB | |
| Mid_bracket.stl | 153.4KB | |
| Raspberry_Pi_2_plate.stl | 289.2KB | |
| Raspberry_Pi_4_plate.stl | 540.9KB | |
| Rear_bracket.stl | 186.4KB | |
| Rear_leg.stl | 107.3KB | |
| Right_panel.stl | 709.0KB | |
| Right_panel_rear.stl | 192.5KB | |
| Top_panel.stl | 891.5KB | |
| Top_panel_rear.stl | 86.9KB |
