Pin In Block (Brainteaser) 3D Printer Model
The file 'Pin In Block (Brainteaser) 3D Printer Model' is (stl) file type, size is 96.2KB.
The file 'Pin In Block (Brainteaser) 3D Printer Model' is (stl) file type, size is 96.2KB.
Enspired by the model from Botaz at printables I made the trick durable and easy to print. Also put the pin outside the block so you can easy print in different colors.
Printing (in PLA!):
Block: Layer 0.2 / Nozzle 0.4 / Perimeters:8 / Infill 100% / no support or brim / Print flat as postioned in the STL
Pin: Layer 0.2 / Nozzle 0.4 / Perimeters:5 / Infill 100% / no support or brim / Print with the head on the bed as positioned in the STL
It's a modern approach to the classic nail thru wood trick.
To get the nail inside you have to steam up and bend the wood.
With this model it's almost the same: PLA gets soft above 80°C...
See video how it works:
| Block.stl | 169.0KB | |
| Pin.stl | 171.2KB |
