Pike Or Musky Lure For Fishing 3D Printer Model
The file 'Pike Or Musky Lure For Fishing 3D Printer Model' is (stl) file type, size is 251.8KB.
The file 'Pike Or Musky Lure For Fishing 3D Printer Model' is (stl) file type, size is 251.8KB.
This is a complete northern pike split plug/lure. I designed this for top water, you will need to cast a double sided mold in some sort of mold material and then cast plastisol for the tail. I use mold max 60 silicone by smoothon and then do injection molding. If you wanted too you could also print the tail in flexible filament as I'm sure that would also work. It might not be as finished though.
The design uses cotter pins size 3/32" and about 1.5" long cut to size and bent to be held in, the two sides are then CA glued together.
I have made a video about how it was made which you can find here: https://youtu.be/tdqNYjllf8k
As well as an assembly video which you can find here:
https://youtu.be/eSIgtFYHZXQ
You can print everything as it comes in the STL with the cotter channels down flat to the bed, no support is required. The tail file without boxes might be tricky and will require supports based on your printer.
This bait assembles just fine the way it is and will fish but I may change the design in the future.
| Large_grub_tail_silicone_box.stl | 490.8KB | |
| Pike_top_lure_grub_tail_v2_split.stl | 33.9KB | |
| Pike_top_lure_nose_v2_split.stl | 65.3KB | |
| Pike_top_lure_v2_body_split.stl | 89.9KB |
