Pikachu Lithophane 3D Printer Model
The file 'Pikachu Lithophane 3D Printer Model' is (stl) file type, size is 1.0 MB.
The file 'Pikachu Lithophane 3D Printer Model' is (stl) file type, size is 1.0 MB.
Print at 0.3mm layer height. (I think I scaled the Z to 1.3 in cura as well.) The end result was 4-5 layers.
I used a heat gun to both curve the lithophane prior to tracing/cutting, and to soften it during the wedging process.
| Pikachu_Lithophane.stl |
