PIGZ 3D Printer Model
The file 'PIGZ 3D Printer Model' is (stl) file type, size is 3.4 MB.
The file 'PIGZ 3D Printer Model' is (stl) file type, size is 3.4 MB.
'PIGZ' are a fun novelty print of a Pigs Head / Face... with an internal spring designed in that makes the nose move in / out when you push on the spring base. And, as there is usually some contact between the internal spring and the surrounding surface, or the spring movement itself, PIGZ even make a slight grunting noise... try it for yourself!
They can be a real talking point particularly over meal times or for use to discourage people eating when they are on a diet etc.
This is a simple print that looks great in any colour. Scaling down is not recommended as it will reduce the size of parts, making them weaker, as well as reduce the internal clearances making fusing more of an issue. Scaling up is however possible to some extent but going too large will result in too great clearance between the designed in support and the base of the model.
Please take time to read the instructions / print setting and post-printing notes as well view all of the images as this will help ensure a grunting result!
And, please post images of your 'PIGZ' for other members to see...
Note: If you like this check out the rest of my fun and practical designs.
| pigz.stl |
