Click-snap assembly (no glue, no bolts). Can be taken apart afterwards.
Designed to be printed with 0.6 (or smaller) nozzle at 0.2 layer height, no supports needed.
This little van can serve as a piggy bank with one of the roof inserts.
If you like this thing, you could support me by purchasing the full version
that has an interior and steering. Can be found here on Cults:
https://cults3d.com/en/3d-model/game/piggy-van
Explosion diagram in 3d viewer (Sketchfab): https://skfb.ly/6W9wB
10x10x6cm, 70g.
| 10_Axle.stl | 860.7KB | |
| 11_1_Wheel_Tire.stl | 626.0KB | |
| 11_2_Wheel_Cap.stl | 1.2MB | |
| 1_1_Roof_V1.stl | 2.0MB | |
| 1_2_Roof_V1_Blinkers.stl | 1.3MB | |
| 1_3_Roof_Cap.stl | 719.9KB | |
| 1_4_Roof_Insert_PiggyBank.stl | 464.0KB | |
| 1_5_Roof_Insert_Frame.stl | 90.9KB | |
| 2_1_Front_Window.stl | 8.5KB | |
| 2_2_Front_Window_Frame_Mirrors.stl | 526.4KB | |
| 3_1_Front_V1_Bonnet.stl | 805.7KB | |
| 3_2_Front_V1_Grill.stl | 740.3KB | |
| 3_3L_Front_V1_Headlight_L.stl | 549.6KB | |
| 3_3R_Front_V1_Headlight_R.stl | 516.9KB | |
| 4_Front_Bumper_V1.stl | 190.4KB | |
| 5_1_Interior_Front.stl | 244.7KB | |
| 5_2_Interior_Wall.stl | 104.8KB | |
| 6_1L_Side_Simple_L.stl | 5.6MB | |
| 6_1R_Side_Simple_R.stl | 5.6MB | |
| 6_2L_Side_Door_Window_L.stl | 16.1KB | |
| 6_2R_Side_Door_Window_R.stl | 16.1KB | |
| 6_3L_Side_Door_Window_Frame_L.stl | 79.3KB | |
| 6_3R_Side_Door_Window_Frame_R.stl | 79.3KB | |
| 6_4_Side_Door_Handle.stl | 64.9KB | |
| 6_5_Side_Insert_Spacer_Ribs.stl | 69.2KB | |
| 6_6_Side_Insert_Frame.stl | 55.2KB | |
| 7_1_Back_Door_R.stl | 444.4KB | |
| 7_2_Back_Door_L.stl | 658.6KB | |
| 7_3_Back_Door_Hinge.stl | 221.4KB | |
| 7_4_Back_Door_Window.stl | 17.1KB | |
| 7_5_Back_Door_Frame.stl | 82.3KB | |
| 8_1_Floor.stl | 1.2MB | |
| 8_2_Rear_Bumper.stl | 409.3KB | |
| 8_3_Rear_Bumper_Blinker.stl | 176.7KB | |
| 9L_Frame_Simple_L.stl | 584.1KB | |
| 9R_Frame_Simple_R.stl | 584.1KB | |
| X_11_1_Wheel_Tire_Bearing_MR105ZZ.stl | 607.6KB | |
| X_1_4_Roof_Insert_Spacer.stl | 69.0KB | |
| X_1_4_Roof_Insert_Spacer_Ribs.stl | 83.3KB | |
| X_1_5_Roof_Insert_Flat.stl | 185.6KB | |
| X_6_5_Side_Insert_Spacer.stl | 48.3KB | |
| X_6_6_Side_Insert_Flat.stl | 143.6KB | |
| X_6_6_Side_Insert_Flat_2.stl | 307.3KB | |
| Z_Plate_1_Body.stl | 13.1MB | |
| Z_Plate_2_Chassis.stl | 4.9MB | |
| Z_Plate_3_Window_Frames.stl | 1.2MB | |
| Z_Plate_4_Wheel_Caps.stl | 5.0MB | |
| Z_Plate_5_Wheel_Tires.stl | 2.4MB | |
| Z_Plate_6_Lights.stl | 14.1MB | |
| Z_Plate_7_Body_Inserts.stl | 1.5MB | |
| Z_Plate_8_Windows.stl | 74.5KB | |
| Z_Plate_9_Roof.stl | 2.7MB |
![Slinky [Toy Story] 3D Printer Model](https://res.3axis.co/ffd959c8-2302-41a1-8513-dd7a610a34b2/images/25cc1f87-4dd0-4aad-85c3-6b7012958ed5_thumb.jpg)
