Pick Display 3D Printer Model
The file 'Pick Display 3D Printer Model' is (STL) file type, size is 67.1KB.
The file 'Pick Display 3D Printer Model' is (STL) file type, size is 67.1KB.
I designed this pick display for a couple of guitar picks I recently got on some shows that I wanted to keep in a display and decided to design one for myself.
This is the basic version of my design, this lets you add in Meshmixer the band logo on the front to be displayed along with the pick.
The square on the back it's for adding blue-tack and still be able to be flush with the wall.
Or you can put a small picture frame and there's a hold for that as well it's a bit too shallow, but it works might even work with a flat headed needle, so the damage to the wall is minimal.
The "glass" can be sledded from the top and can be a max of 1.5 mm thick. I'm using some plastic sheet I had lying around in my workshop.
For now, I have customized it for Ghost BC and for Týr, the paint job if it can even be called that was done with a napkin and some acrylic paint, so it's rough, but I didn't have any brushes at home and the background is still to be painted for contrast of the silhouetted pick.
| Pick_display_2.0.STL | 235.9KB |
