This is a drop-in raspberry pi camera mount for the RSPB's camera feeder housing. It uses the same screw and screw holes the supplied bracket uses, no modifications are required to the housing. The angle of the 'head' is adjustable, using a bolt and nut from Mike Mattala's nut job.
| bolt.stl | 789.6KB | |
| cam_base.scad | 2.1KB | |
| cam_base.stl | 356.8KB | |
| cam_head.scad | 1.1KB | |
| cam_head.stl | 465.2KB | |
| wingnut.stl | 295.3KB |
