Pi Zero Shelf 3D Printer Model
The file 'Pi Zero Shelf 3D Printer Model' is (stl) file type, size is 2.0MB.
The file 'Pi Zero Shelf 3D Printer Model' is (stl) file type, size is 2.0MB.
This shelf allows you to stack neatly between 2 and 6 Raspberry Pi Zeros encased in a minimalist case. I'm using the Zebra Zero Heatsink Case – Raspberry Pi Zero/Zero W/Zero 2 from C4Labs - https://www.c4labs.com/product/zero-heatsink-case-raspberry-pi-zero-w/ but any similar case with just a top and bottom should also work. Clearance may be an issue otherwise.
Note: There is no access to the GPIO pins when using this case. It is meant for running your Pi Zeros in a headless mode.
The shelf prints in a single body. Files include 2, 3, 4, 5 and 6 shelf versions.
With the case on the Pi Zero, it measures 2.75" wide x 1.25" deep x 9/16" high. A tolerance of 0.08" has been added to allow a little clearance on all sides within each shelf slot.
The outer wall and shelf thickness is 0.05"
| 2DrawerWithPowerAndHDMISlots.stl | 491.3KB | |
| 2DrawerWithPowerSlotsOnly.stl | 478.4KB | |
| 3DrawerWithPowerAndHDMISlots.stl | 934.9KB | |
| 3DrawerWithPowerSlotsOnly.stl | 916.8KB | |
| 4DrawerWithPowerAndHDMISlots.stl | 1.3MB | |
| 4DrawerWithPowerSlotsOnly.stl | 1.3MB | |
| 5DrawerWithPowerAndHDMISlots.stl | 1.8MB | |
| 5DrawerWithPowerSlotsOnly.stl | 1.8MB | |
| 6DrawerWithPowerAndHDMISlots.stl | 2.2MB | |
| 6DrawerWithPowerSlotsOnly.stl | 2.2MB |
![[HSW] Stackable [IKEA] Ice Cube Tray 3D Printer Model](https://res.3axis.co/55001f8f-61ab-468c-a1aa-d09c71e821c8/images/6560bba8-5e07-40be-b4f0-b285fd1e1e3b_thumb.jpg)
