Pi Zero Security Camera 3D Printer Model Free Download

3D Printer Models

Pi Zero Security Camera 3D Printer Model

Author: @T_Hambush

License: CC BY

File formats: stl

Download type: zip

Size:61.7KB

The file 'Pi Zero Security Camera 3D Printer Model' is (stl) file type, size is 61.7KB.

Description Files (5)

Summary

This has been designed to house a Raspberry Pi Zero and Pi camera all in one package. No supports are required if you orientate everything correctly.

The camhinge is a push fit into the campicase and my tolerances were such that I didn't need to glue it.
The Pi camera is installed in the camcase and the camcaselid clips on the back securing it.
The Pi camera cable (for the Zero) passes though the camhinge into the campicase and is inserted into the Pi Zero slot.
The camcase is secured to the camhinge using a M3 25mm bolt and nut.
The Pi Zero is secured into the case with M2.5 5mm screws.
The campicaselid clips on to the campicase.

I set up my Pi with Raspbian and Motion Eye to provide streaming. These are the steps I took to get Motion Eye running on the zero:

http://snardfarkle.blogspot.com.au/2016/04/ip-camera-on-raspberry-pi-3-using.html

This results in a fully configurable security camera with motion detection, local/remote storage of images captured, email notifications of movement etc.

camcase.stl	128.8KB
camcaselid.stl	3.8KB
camhinge.stl	37.6KB
campicase.stl	72.9KB
campicaselid.stl	76.8KB

Pi Zero Security Camera 3D Printer Model

Summary

Tags

You might also like