This is LaBr-gun, a special laser pistol for Home LASER Shooting Simulator project (http://homeless-eng.webnode.com).
Main parameters:
Video presentation: https://www.youtube.com/watch?v=urSbjwg38oo
Assembly guide:
Part list: http://homeless-eng.webnode.com/labr-guns/pi-1/partlist/
Trigger mechanism (video guide): https://www.youtube.com/watch?v=06zSJDoxa7Y
1x gun_body
1x gun_body (mirrored)
1x magazine_bottom
1x grip
1x grip (mirrored)
5x nut_clip
1x verticalAdjusterDn10.stl (or Dn12.stl, Dn14.stl)
1x shipMk2
1x consola
1x slide_side_mirror
1x slide_side
1x slide_top
1x sight_rear_base
1x slide_front
1x fake_barel
1x sight_front
1x sight_rear
1x slide_holder_back
1x slide_holder_front
1x Screw M3x10
7x Screw M3x6
1x Nut M3 - 8x
1x Setscrew M3x8
1x Setscrew M3x5
1x Spring 4x10 - 1x (you could get it from ballpoint)
1x Capacitor 2200 uF, 6.3 V (can be for higher voltage, but 6.3 V is small enough)
1x Battery clip (2XAAA)
1x Microswitch (ON-ON)
1x LASER module (5mW)
1x Spokes (from bicykle)
3D printer :D
saw
file
screw tap (M3, M4, M6)
sandpaper
soldering iron
etc.
| consola.stl | 503.6KB | |
| fake_barrel.stl | 105.3KB | |
| grip.stl | 81.8KB | |
| gun_body.stl | 793.9KB | |
| magazine_bottom.stl | 52.4KB | |
| magazine_bottom_with_support.stl | 77.1KB | |
| nut_clip.stl | 29.1KB | |
| readme.txt | 1.2KB | |
| ship.stl | 707.8KB | |
| shipMK2.stl | 41.8KB | |
| sight_front.stl | 3.9KB | |
| sight_rear.stl | 59.0KB | |
| sight_rear_base.stl | 29.5KB | |
| slide_back.stl | 22.6KB | |
| slide_front.stl | 103.0KB | |
| slide_holder_front.stl | 37.4KB | |
| slide_holder_rear.stl | 35.3KB | |
| slide_side_left.stl | 234.7KB | |
| slide_side_mirror.stl | 238.1KB | |
| slide_top.stl | 38.7KB | |
| swing.stl | 438.7KB | |
| trigger_mechanism_body.stl | 883.4KB | |
| trigger_mechanism_body_mirrored.stl | 277.0KB | |
| trigger_mechanism_lewer.stl | 248.1KB | |
| trigger_mechanism_trigger.stl | 193.3KB | |
| verticalAdjusterDn10.stl | 31.4KB | |
| verticalAdjusterDn12.stl | 31.0KB | |
| verticalAdjusterDn13.stl | 27.8KB | |
| verticalAdjusterDn14.stl | 36.3KB |
