The file 'Pi-like-stack 3D Printer Model' is (stl,json,scad,txt,md) file type, size is 211.3KB.
Yet another way to stack pi-like or other SBCs (single board computers) on top of one another.
For a standard 40pin raspberry pi A/B or similar board you probably want full.stl
https://github.com/BreadMakesYouFull/pi-like-stack
The default board size is for 40-pin like A/B model mainline pi-like devices.
85mm x 56mm x 20mm, with standoffs 2.5mm diameter.
Each layer is 100mm x 75mm.
Printed without-support at 60% infill (PLA)
openscad ./pi_like_stack.scadopenscad file & project - MIT : pi_like_stack_scad_MIT.txt
STL files - CC BY-SA 4.0 : stls.txt
| base.stl | 121.9KB | |
| case.stl | 68.4KB | |
| case_legacy.stl | 55.4KB | |
| custom_1.stl | 201.4KB | |
| custom_2.stl | 337.6KB | |
| full.stl | 224.4KB | |
| full_legacy.stl | 182.4KB | |
| half_double.stl | 336.0KB | |
| half_single.stl | 229.1KB | |
| hat.stl | 52.2KB | |
| hat_light.stl | 715.3KB | |
| hat_minimal.stl | 65.0KB | |
| pi_like_stack.json | 12.7KB | |
| pi_like_stack.scad | 9.5KB | |
| pi_like_stack_scad_MIT.txt | 1.0KB | |
| README.md | 949.0B | |
| stls.txt | 19.7KB |
