Pi Camera Mount Longruner IR 3D Printer Model
The file 'Pi Camera Mount Longruner IR 3D Printer Model' is (stl) file type, size is 259.2KB.
The file 'Pi Camera Mount Longruner IR 3D Printer Model' is (stl) file type, size is 259.2KB.
Camera case for a pi cam with IR blasters. Took inspiration from the great setup that kevinlo designed, however this was designed from the ground up to exactly fit my model of the pi cam, link to Amazon below. This model of the pi cam has 3 photovoltaic sensors, one on each IR blaster and one on the main board. This case opens up that third hole.
If you print all three components, you can then print all of the arms and remaining brackets from kevinlo's design: https://www.thingiverse.com/thing:434600
The rear mount accepts a 4mm nut, the case closes with M3x16 bolts and nuts.
I recommend adding heatsyncs to the back, these cameras run incredibly hot. I used these: https://www.amazon.com/gp/product/B079FQ22LK/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
Longruner Raspberry Pi Camera: https://www.amazon.com/gp/product/B07R4JH2ZV/ref=ppx_yo_dt_b_asin_image_o09_s01?ie=UTF8&psc=1
| Pi_Camera_Mount_-_Back_Plate.stl | 529.8KB | |
| Pi_Camera_Mount_-_Bracket.stl | 98.3KB | |
| Pi_Camera_Mount_-_Front_Plate.stl | 548.3KB |
