Pi Boy Portable 3D Printer Model
The file 'Pi Boy Portable 3D Printer Model' is (stl) file type, size is 9.0MB.
The file 'Pi Boy Portable 3D Printer Model' is (stl) file type, size is 9.0MB.
inspired by Carasibana's great Super Game PiSP and it's root: adafruit's super DIY Raspberry Pi Gameboy
notable changes:
| body_backplate.stl | 5.7KB | |
| body_backplate_sliders.stl | 19.2KB | |
| body_frame_front.stl | 61.9KB | |
| body_frame_side_left.stl | 67.2KB | |
| body_frame_side_right.stl | 66.1KB | |
| body_frame_top.stl | 13.9KB | |
| body_painting_rig.stl | 41.5KB | |
| body_raspberry_support.stl | 5.4KB | |
| body_rear_01.stl | 11.2KB | |
| body_rear_02.stl | 16.1KB | |
| body_rear_03.stl | 22.5KB | |
| body_rear_04.stl | 16.1KB | |
| body_rear_05.stl | 11.0KB | |
| body_rear_06.stl | 16.1KB | |
| body_rear_07.stl | 11.0KB | |
| body_rear_08.stl | 16.1KB | |
| body_rear_09.stl | 11.0KB | |
| body_rear_10.stl | 16.1KB | |
| body_rear_11.stl | 11.8KB | |
| body_rear_base.stl | 34.9KB | |
| body_tft_back_and_raspberry_carrier.stl | 20.9KB | |
| body_tft_back_hdmi_pcb_clamp.stl | 6.9KB | |
| DO_NOT_PRINT_outline.stl | 3.7MB | |
| DO_NOT_PRINT_THIS.stl | 6.1MB | |
| left_bottom.stl | 1.2MB | |
| left_bottom_WITH_SUPPORT.stl | 1.2MB | |
| left_button_carrier.stl | 36.4KB | |
| left_button_d-pad.stl | 39.9KB | |
| left_button_shoulder.stl | 129.9KB | |
| left_button_start_select.stl | 31.5KB | |
| left_top.stl | 1.3MB | |
| left_top_WITH_SUPPORT.stl | 1.3MB | |
| right_bottom.stl | 1.2MB | |
| right_bottom_WITH_SUPPORT.stl | 1.2MB | |
| right_button_carrier_1.stl | 19.8KB | |
| right_button_carrier_2.stl | 126.8KB | |
| right_button_escape.stl | 4.7KB | |
| right_button_shoulder.stl | 129.9KB | |
| right_top.stl | 1.3MB | |
| right_top_WITH_SUPPORT.stl | 1.3MB |
