Attaches to windscreen adjustment arm on a Yamaha Tracer and provides an AMPS plate. Photos show it with a QuadLock AMPS plate, but you can put whatever you like on there.
It slips on with a clip holding it down to the part of the bike at the back, and the two arms hold screws that go into the hollow bits in the adjuster pivot point. I used 1 inch (about 25mm) screws, a nut goes into the recess, put it in place, get the screw going into the hollow in the pivot, and tighten it snugly. The screws do not thread into the pivot, they simply sit there and hold it in place.
Attachment to the bike is sized for either M4 or US 8-32 sized screws and nuts. It's exact for 8-32 and that's a slightly better fit into the hole than M4, but either will work OK. The AMPS plate is M4.
SCAD is provided if you need to make changes, though it's pretty messy. Sorry about that but I can't be bothered to make it pretty.
| tracermount.scad | 4.3KB | |
| TracerMount.stl | 172.0KB |
