By Joakim Janstad
Instead of permanently attaching it to the frame you now attach it with rubber bands and can easily remove the whole mount when you don't want to use it. Use multiple rubber bands if they should break!
Holding most phones in place using a rubber band loaded arm, this device will hold most smart phones and fits most bikes using a modern steering stem. I previously tried using clip-functions for the holders but with bad result. 3D prints usually breaks after a few uses. That's why I decided to go for a rubber band solution.
Confirm to work with Nexus 5, 1+3, Iphone 6s. Designed to also work for the Pixel phones but not yet confirmed to work. Probably works with most smart phones.
See pictures on how to attach rubber bands. Instead of using rubber bands try springs for a more long lived product.
I spray painted mine to withstand rain better.
Max dimensions of phone is 77x150x10 mm.
Min dimensions of phone is 59x120x1 mm.
Stem size top to bottom D 34.5mm
Stem size side to side D 32mm
Fits with M5 screws 20-30mm long and nylon threaded M5 nuts.
Now go catch 'em all
| bottom_left.stl | 18.1KB | |
| bottom_right.stl | 18.1KB | |
| frame.stl | 812.0KB | |
| top.stl | 32.5KB |
