Instructional Video for this model: https://www.youtube.com/watch?v=Oe2ju462aR0

A unique, beautiful, and engineered phone stand ready to be printed by you! This is a very easy print with basic support removal. Perfect for anyone who wants to use it at their desk, kitchen table, or anywhere! This phone stand has been engineered and topology optimized in order to support heavy tablets, THICK cases, and reduces wobble when tapping on the screen. Your phone can be used in BOTH landscape and portrait mode!

Why should I print this phone stand and not any other one?

• It's a quick and easy print as compared to other popular models (4-4.5 hrs. on CR-10)
• It's big phone / case friendly unlike 90% of other uploaded stands
• It's was engineered and analyzed to withstand up to 2lbs/0.9kg weight
• It allows for your phone to be used in portrait or landscape mode
• It includes wobble protection if you intend to TAP on your phone while in portrait mode
• EASY support removal, no need to spend hours trying to pick at little plastic pieces.

If you print one, PLEASE post a make! It makes my day watching someone print and enjoy my design! Let me see how yours turned out

There are now 6 versions to choose from. LOTS OF STL'S but no worries, I will make choosing the version you easy:

[50deg] vs [60deg] vs [70deg] : This is the angle of tilt your phone will be at. 60 [deg] should be fine for most, but choose what ever angle you believe your viewing angle will be optimal at. This angle is measured from the horizontal surface, upwards in a counter-clockwise direction. I, a TALL 6'2 person, have the best viewing experience with a 50 [deg] angle.
There is also a 60deg_18mm version which is made for phones+cases which are 18mm thick, which are LARGE cases. More than likely, you wont need this version unless you have a very thick case.
I also have a flower and honeycomb version which are both at 60 [deg] if you don't want a completely plain version. There is no other difference from the 60 [deg] other than the design.

The phone stand gap where your phone will sit is 14 [mm] for all except the 60deg_18mm version. This will fit 99% of flagship phones with medium to thick cases! The front legs are 6 [mm] tall.

Feedback is appreciated. Leave any comments or questions down below.

Updates
V2.1 - Original Version
V2.2 - Changed the center of mass so that wobble is reduced dramatically.
V2.3 - For steeper versions, the top bridge of the stand was getting thinner and thinner making it easy to break if not careful. All versions now have the bridge thickness to ensure part doesn't break easily.