Phone Stand 3D Printer Model
The file 'Phone Stand 3D Printer Model' is (stl) file type, size is 1.6 MB.
The file 'Phone Stand 3D Printer Model' is (stl) file type, size is 1.6 MB.
To complete this print you need an M3 set screw and an M3 insert. If you can't find a set screw you can cut the head off from a 10mm M3 screw and insert(screw) it into the rod.
I recommend it to use an insert nut because there will be less friction in the insert nut than the plastic. I simply heat the nut using my soldering iron and slide it into the hole.
| handle.stl |
| main.stl |
| nut.stl |
| screw.stl |
