This is a stand that I use to hold my smartphone during video recording or to provide a better stability when I take photos of my Thingiverse things.
It is a mixed construction that uses printed parts and commercial components.
I used 16mm aluminum tubes for the arms, an M4 threaded bar for the tilt adjustment and a base recovered from a scrap lamp.
To attach the vertical tube to the base I made an expandable stud, but you can use screw also
The phoneholder can hold my phone that is 75 mm wide but also up to 85 mm are managed
A rubber band can be used to provide pressure with terminal clamps
Following the BILL OF MATERIALS
PRINTED PARTS
q.ty code description
1 PHstand_001 FEET
1 PHstand_002 WEDGE
1 PHstand_003 EXPANDER
1 PHstand_004 BAR
2 PHstand_005 TERMINAL CLAMP
1 PHstand_006 FORK A
1 PHstand_007 FORK B
3 PHstand_008 CLAMP A
1 PHstand_009 CLAMP C
1 PHstand_010 CLAMP F
6 PHstand_011 KNOB
HARDWARE
5 M4x25 HEX HEAD SCREW
3 M4x10 HEX HEAD SCREW
7 M4 HEX NUT
1 M4 x 22 HEX SOCKET HEAD CAP SCREW
1 M4 x 14 HEX SOCKET HEAD CAP SCREW
2 Ø16 x 400mm Aluminum tube
1 M4 x 150mm threaded bar
| PHstand_001.STL |
| PHstand_002.STL |
| PHstand_003.STL |
| PHstand_004.STL |
| PHstand_005.STL |
| PHstand_006.STL |
| PHstand_007.STL |
| PHstand_008.STL |
| PHstand_009.STL |
| PHstand_010.STL |
| PHstand_011.STL |
