Phone Mount For MINI F-Series 3D Printer Model
The file 'Phone Mount For MINI F-Series 3D Printer Model' is (stl) file type, size is 72.3KB.
The file 'Phone Mount For MINI F-Series 3D Printer Model' is (stl) file type, size is 72.3KB.
Do you have an F-series mini cooper ? Do you have phone ? Then you'll probably like this !
The air vents on either extremity of the dash board are easily pried off with a trim removal tool. The phone mount can then be placed around the vent hole before you put it back in place. You now have an ideally situated phone mount !
The round part on the end has a diameter of 56mm in case you want to make a custom attachement for your phone and there are two cable routing clips on the mount.
I use a Samsung galaxy s20+ for which I designed an attachement which uses 8 magnets of a 10mm diameter (cheap on Amazon) to hold the phone in place. There is also a cutout for a wireless charging coil.
Feel free to post your own attachements as remixes and leave any feedback on the design :)
| MINI-F-Phone_Mount.stl | 83.7KB | |
| S20+_backplate.stl | 47.1KB | |
| S20+_frontplate.stl | 93.8KB |
