Desktop charging dock for medium to small phones. Great for OLED phones with an always on display, or enabling screensaver mode while charging.
The hole for the charging cable is centrally located towards the back edge of the cutout, This allows for the phone to either be docked and charging or sitting in the front half and only resting in the dock.
Hole cutout for charging cable = 13mm x 8mm
Maximum phone width = 77mm
Hole Spacing (double dock) = 85mm
I designed this to be universal and suitable for different/future charging cables. My fast charge cable is quite thick but not as thick as others i have, In my case i jammed the end of a cable tie up from the bottom to keep the port in place. You can try blu-tack, silicon it in or what ever works for your cable.
The photos are of sanded, primed and gloss painted models but 0.15 layer thickness was presentable on its own.
| Phone_dock_-_double.stl |
| Phone_dock_-_single.stl |
![Passive Phone-Horn [iPhorn] 3D Printer Model](https://res.3axis.co/3984ddea-8086-4ed9-b197-4d41758d3644/images/8d400b85-a321-4b07-941c-6434b48b494d_thumb.jpg)
