This is a remix of @yyh1002 or Ryan Huang's Modular Mounting System. I got his file of the Phone clamp up & down. His base and an arm. I also used his M5 nut. I remodeled the knob for the clamp because his had a problem printing. I also had a problem printing the M5x65 screw so I used my own metal screw. I included a M5x25 screw, M5 nut, and the M5_knob_short. The only one of those three that I used was the M5 nut for the clamp. I used GoPro camera mount screws instead of the M5x25 screw and M5 nut. I made this post to help simplify his. I just wanted a phone stand but I found it hard to do with his post so I wanted to help all of y'all out and make a simple post.
| Arm_v3_90.stl | 496.5KB | |
| Flat_stand.stl | 275.6KB | |
| M5.0_Nut.stl | 73.0KB | |
| M5x25_D.stl | 2.3MB | |
| M5_knob_short_v4.stl | 947.4KB | |
| Phone_clamp_down_4mm_thicker_v3.stl | 411.6KB | |
| Phone_Clamp_KnobV8.stl | 437.9KB | |
| Phone_clamp_up_4mm_thicker_WITH_tab.stl | 652.1KB |
