A phone attachment to look at your Phone while Biking. Look at Google maps while on the bike.
I recommend using PETG for the spring to make it more elastic and sutable for the phone damping.
See the damping effect here:
https://youtu.be/F4DOk7q4QXo
Use the 3 screws attached to the over and under arm for the spring to tighten and loosen the damping.(The 3 green screws in picture no. 5.)
All screws are 5mm and attachments are compatible with GoPro attachments. Use 5x25 ore 5x30mm screws with Hex head.
Use 5mm treadRod to bruch up all the printed treads. Se last picture.
For the phone holder I recommend you use:
Phone stand with screw and GoPro attachment:
https://www.thingiverse.com/thing:4328023
Use SvingFeemaleGoproAtachment provided here instead of MaleAtachment in the above Phone stand.
Update 14. jun. 2020:
Added 360 degrees swing attachment:
SwingNutGoPro.stl
SwingPlateGoPro.stl
SwingScrewGoPro.stl
New Bike attachment part (V2). For more flexible attachment to other GoPro attachments.
And the fastener screw is inserted from underneath for easier use.
BikeHandleTopMaleV2.stl Bike attachment part with male GoPro attachment.
BikeHandleTopMale-90-V2.stl Same as above but 90 degres for GoPro attachment.
BikeHandleTopFeemaleV2.stl Bike attachment part with female GoPro attachment.
BikeHandleTopFeemale-90-V2.stl Same as above but 90 degres for GoPro attachment.
BikeHandleBottomV2.stl Bike attachment bottom part.
All my GoPro related Things:
GoPro Bike and tripod atachment with quick coupling
https://www.thingiverse.com/thing:4570589
Phone stand with screw and GoPro atachment
https://www.thingiverse.com/thing:4328023
Phone Atachment to Bike with spring damper
https://www.thingiverse.com/thing:4458076
Heavy GoPro Base Stand
https://www.thingiverse.com/thing:4693687
Light GoPro Base Stand
https://www.thingiverse.com/thing:4696458
DSLR camera Stand with GoPro atatchment
https://www.thingiverse.com/thing:4424068
GoPro Attachment system
https://www.thingiverse.com/thing:4696725
| ArmOver.stl | 494.8KB | |
| ArmUnder.stl | 217.7KB | |
| BikeHandleBottom.stl | 271.4KB | |
| BikeHandleBottomV2.stl | 341.0KB | |
| BikeHandleTop.stl | 462.6KB | |
| BikeHandleTopFeemale-90-V2.stl | 560.1KB | |
| BikeHandleTopFeemaleV2.stl | 565.7KB | |
| BikeHandleTopMale-90-V2.stl | 371.1KB | |
| BikeHandleTopMaleV2.stl | 372.1KB | |
| NutCylinder.stl | 614.4KB | |
| SkrewHead.stl | 372.9KB | |
| Spring.stl | 795.0KB | |
| SvingFeemaleGoproAtachment.stl | 359.3KB | |
| SwingNutGoPro.stl | 1.2MB | |
| SwingPlateGoPro.stl | 180.3KB | |
| SwingScrewGoPro.stl | 742.9KB |
