This is a mod I made for the iFlight Helion. It is not a full 10" drone project. It includes all the necessary files to convert the Helion into the Phoenix. Files are named with a prefix that stands for the material you should use to create them.

Some notes:

• GPS holder is designed to fit the Foxeer M10-250.
• Rear tail is designed to fit a TrueRC Bardpole in the middle and two SMA connectors on the sides.
• Original ESC must be rotate 180° and the XT90 resoldered to stay in the front, passing through the bottom plate.
• You need to change most of the original screws, be prepared.
• GoPro mount does not fit the original USB BEC, but fits a generic USB plug tha you can find on Amazon. You must power it with a dedicated BEC that provides 5V outpout. The mount also include a holder for the buzzer and allows the passage of wires to connect the buzzer to the FC.
• DJI Air Unit will now be sitting in the back. You must get a 30cm camera cable to reposition it. 25cm may be enough, 20cm will not make it.
• LED holders are designed specifically for MenaceRC COB LEDs. You will have space in the front to accomodate the LED driver.
• Radio link receiver can be positioned on top of the O3 air unit, to keep antenna wires as short as possibile to the back antenna, that is considered the main one.

I won't be responsible, under any circumstamces, of any damage to your drones doing this mod. I will not be responsible as well of any issues in fitting the parts onto your drones. The parts have been tested on my unit that was one of the earliest sold, but I cannot guarantee they will work on all the Helion units, since I don't know if any changes have been applied to the latest version sold. I've shared it upon several requests from the people, and that's it. You will be solely responsible for it.

Please notice that the original Helion design is property of iFlight and 2RAW. I am just sharing this mod and in no way I am trying to infringe any copyright that may be present on the original design. Also let me make clear that I am not taking any advantage from it, as this is just a mod I made for myself without any intention to sell it or to get any profit from it. Again, I am just sharing it upon request from several people.

This said, if you wish to realize the components by yourselves, you can download the files and you're good to go. If you don't know where to get the parts, I can suggest you to get in touch with MyFrameFPV. They already have the files in their hand and you can simply purchase the parts from this link: https://www.myframefpv.com/prodotto/custom-parts-helion/

Unfortunately, since I am just an enthusiast who is sharing his mod with the community, I do have very limited free time and cannot support you in putting it together. You need to figure out by yourselves how to put it together in the right way. It should be self-comprehensive if you're familiar with building drones.

Have fun!